8060007
Carbon Steel Countersink #7
Product Description
Whiteside’s 82° Countersink Heads are designed to slip over the drill bit and affix with dual set screws into the flutes. Adjust the drilling length by sliding the head up or down the bit. Use to countersink holes in wood, plastic, or aluminum for flat head screws. Upgrade to the High Speed Steel series for longer life, especially in fiberglass or other abrasive materials. Matching drill bits are offered for your convenience.
Similar Sizes
| Part # | Screw Size | Drill Size | C'Sink Dia. | Large Dia. |
|---|---|---|---|---|
| 8060004 | #4 | 7/64" | 3/8" | 1/2" |
| 8060005 | #5 | 1/8" | 3/8" | 1/2" |
| 8060006 | #6 | 9/64" | 3/8" | 1/2" |
| 8060007 | #7 | 5/32" | 3/8" | 1/2" |
| 8060008 | #8 | 11/64" | 3/8" | 1/2" |
| 8060009 | #9 | 3/16" | 3/8" | 1/2" |
| 8060010 | #10 | 13/64" | 1/2" | 5/8" |
| 8060012 | #12 | 7/32" | 1/2" | 5/8" |
| 8060014 | #14 | 1/4" | 1/2" | 5/8" |
Jobber Drills for Countersinks
| Part # | Dia. | Decimal | Screw Size |
|---|---|---|---|
| 8061094 | 7/64" | 0.1094" | #4 |
| 8061255 | 1/8" | 0.1250" | #5 |
| 8061416 | 9/64" | 0.1406" | #6 |
| 8061567 | 5/32" | 0.1562" | #7 |
| 8061728 | 11/64" | 0.1719" | #8 |
| 8061879 | 3/16" | 0.1875" | #9 |
| 8062010 | 13/64" | 0.2031" | #10 |
| 8062212 | 7/32" | 0.2188" | #12 |
| 8062514 | 1/4" | 0.2500" | #14 |
Taper Point Drills for Countersinks
| Part # | Dia. | Decimal | Screw Size |
|---|---|---|---|
| 8071416 | 9/64" | 0.1406" | #6 |
| 8071728 | 11/64" | 0.1719" | #8 |
| 8072010 | 13/64" | 0.2031" | #10 |
| 8072514 | 1/4" | 0.2500" | #14 |
Related Items
3-Wing Composite Drill
1/2" Dia.
These 3-wing carbide tipped drills are designed for extended life in fiberglass and other composites. The 7/16” hex shank provides a no-slip grip when used with a standard three jaw... View full product details
3-Wing Composite Drill
9/16" Dia.
These 3-wing carbide tipped drills are designed for extended life in fiberglass and other composites. The 7/16” hex shank provides a no-slip grip when used with a standard three jaw... View full product details
3-Wing Composite Drill
5/8" Dia.
These 3-wing carbide tipped drills are designed for extended life in fiberglass and other composites. The 7/16” hex shank provides a no-slip grip when used with a standard three jaw... View full product details
3-Wing Composite Drill
11/16" Dia.
These 3-wing carbide tipped drills are designed for extended life in fiberglass and other composites. The 7/16” hex shank provides a no-slip grip when used with a standard three jaw... View full product details
